|
Your donations keep RPGWatch running!
Re-creating Mr. Handy
October 27th, 2015, 22:40
http://3dprint.com/102629/3dp-fallout-4-mister-handy/
A discussion about how a real Mr. Handy prototype was built and shown.
“One of the most important aspects of it was functional. If this was built in the real world, how it would it work? There’s a shoulder joint at the very top of one of his octopus arms, and it just wasn’t structurally strong enough to hold, even in the 3D printed model. I had to rework how that joint works to increase its durability,” Mejillones explained to Popular Mechanics.
A discussion about how a real Mr. Handy prototype was built and shown.
“One of the most important aspects of it was functional. If this was built in the real world, how it would it work? There’s a shoulder joint at the very top of one of his octopus arms, and it just wasn’t structurally strong enough to hold, even in the 3D printed model. I had to rework how that joint works to increase its durability,” Mejillones explained to Popular Mechanics.
--
c-computer, r-role, p-playing, g-game, nut-extreme fan
=crpgnut or just
'nut @crpgnut
aka survivalnut
c-computer, r-role, p-playing, g-game, nut-extreme fan
=crpgnut or just
'nut @crpgnut
aka survivalnut
October 27th, 2015, 22:43
--
c-computer, r-role, p-playing, g-game, nut-extreme fan
=crpgnut or just
'nut @crpgnut
aka survivalnut
c-computer, r-role, p-playing, g-game, nut-extreme fan
=crpgnut or just
'nut @crpgnut
aka survivalnut
| Thread Tools | Search this Thread |
|
|
All times are GMT +2. The time now is 08:32.
